Installation Of Wedge Anchors
The long wedge anchors bolt is then given 3 different types of anchor installation.
1, Pre-inserted installation: Most of the anchor bolts are flush with the base material after installation. Installation process: Delineate the installation hole position of the anchored object on the anchorage base. Drill the hole, clear the hole, insert the anchor bolt, and fix the anchored object with screws.
2. Penetration installation: This method is recommended for bulk installation or when the anchor has multiple anchorage points to simplify the installation procedure: the holes in the anchor can be used as a drilling template because the diameter of the holes in the anchor is at least the same as the diameter of the holes in the substrate.
This method of installation simplifies the installation process and allows for a good fit.
The wedge anchors screwfix is inserted through the anchored object into the hole and then allowed to expand.
When using frame steel wedge anchor or U-shaped spacers, the spacers prevent the anchor from being inserted too deeply.
3, The function of spacer installation is to maintain a certain distance between the anchored object and the surface of the anchored foundation, and to achieve compressive and tensile fixation at this distance. For this purpose, in most cases, metal anchor bolts with metric threads are used, and screws or screws with fastening nuts are screwed into the anchor bolts.
